彈簧觸指的設計與應用
胡金祥
（寶馬彈簧(上海)有限公司，上海 201808）
摘 要：結構的獨特性使彈簧觸指所表現出來的機械及電氣特性非常適用于電氣產品的連接。介紹了彈簧觸指在電氣產品應用中的機械及電氣性能，闡述了其在各項型式試驗內所對應的設計參數，并列出了常用的一些彈簧觸指規格。指出進一步的研究應著重于彈簧觸指計算模型與試驗結果偏差的修正以及彈簧觸指長期工作對性能的影響。
關鍵詞：彈簧觸指；型式試驗；尺寸設計
中圖分類號：TH135；TM502 文獻標識碼：A 文章編號：1007-3175(2017)10-0060-05
Design and Application of Spring Contact Finger
HU Jin-xiang
（BAUMANN Springs (Shanghai) Co., Ltd, Shanghai 201808, China）
Abstract: Because of its unique characteristic, the spring contact finger presents perfect mechanical and electric behavior which makes it outstanding in the application of electrical products connection. Introduction was made to the mechanical and electric performance of spring contact fingers in the application of electrical products. This paper expounded its corresponding design parameters in each type test and listed those commonly used spring contact finger specification. It is pointed out that the further research should focus on the spring contact finger calculating model, the amendment of test result bias and the impacts of the spring contact finger long term operation on the performance.
Key words: spring contact finger; type test; dimensional design
參考文獻
[1] 黎斌.SF6 高壓電器設計[M]. 北京：機械工業出版社，2003.
[2] 徐國政，張節容，錢家驪，等. 高壓斷路器原理和應用[M]. 北京：清華大學出版社，2006.
[3] GB 11022—1999 高壓開關設備和控制設備標準的共用技術要求[S].
