1 036 MW機組高備變零序電壓U0偏高的分析及處理
楊彪，曾向榮，李洪
（華能海門電廠，廣東 汕頭 515132）
摘 要：高備變是保證電廠發電機組安全運行的基礎。針對華能海門電廠110 kV高備變在正常運行中零序電壓異常升高情況，分析了其對系統的影響，討論了引發異常的可能原因，經多方面論證并針對性排查，確定原因?yàn)楦邆渥冎行渣c(diǎn)引出線與接地電阻間腐蝕產生氧化鋁致使中性點接地破壞所造成的，通過采取相應的處理及防范措施，保證了高備變恢復正常運行。
關鍵詞：變壓器；平衡繞組；零序電壓；中性點接地
中圖分類號：TM835 文獻標識碼：B 文章編號：1007-3175(2017)11-0038-03
Analysis and Treatment of High Zero Sequence Voltage U0 of High-Voltage Standby Transform in
1 036 MW Generator Sets
YANG Biao, ZENG Xiang-rong, LI Hong
（Huaneng Power International, INC. Haimen Power Plant, Shantou 515132, China）
Abstract: The high-voltage standby transformer is the basis to ensure the safe operation of generator sets in power plant. Aiming at the abnormal rise of zero sequence voltage during the normal operation of 110 kV high-voltage standby transformer in Huaneng Haimen power plant, this paper analyzed the influence on the system and discussed the possible, abnormal causes. After the demonstration and targeted investigation, it is found that the aluminium oxide formed because of the corrosion between the high-voltage standby transformer neutral point lead wire and the grounding resistance. The corresponding treatment and precautionary measures are adopted to ensure the high-voltage standby transformer get right operation.
Key words: transformer; balanced winding; zero sequence voltage; neutral-point earthing
參考文獻
[1] 董景義，段玉柱，張賢國，等. 平衡繞組在變壓器中的作用及連接線方式淺述[J]. 電工文摘，2009，46(6)：20-23.
[2] 賀家李，李永麗，董新洲. 電力系統繼電保護原理[M]. 北京：中國電力出版社，2010.
[3] 黃禾，錢國超，鄒德旭，等. 平衡繞組引起變壓器低壓側電壓不平衡分析[J]. 云南電力技術，2014，42(S1)：60-61.
