高壓斷路器驅動凸輪分析研究
李鵬，劉永慶，李長鵬，湯清雙
（許昌許繼德理施爾電氣有限公司，河南 許昌 461000）
摘 要：對斷路器合閘過程中凸輪滾子進行了受力分析，得出了凸輪壓力角α及超程與凸輪轉角β之間的函數關系式，進而將滾子所受的力表示成β 的函數。用MATLAB軟件繪制出力與β 的函數關系圖，并用ADAMS對符合實際情況的凸輪模型進行了動力學仿真，理論計算和仿真分析所得結果基本一致。該分析結果可用于凸輪受力分析及其相關零部件的設計、強度校核，同時也為斷路器機構的彈簧力輸出特性與斷路器的負載特性之間的匹配提供理論依據。
關鍵詞：斷路器；凸輪；函數關系；動力學仿真
中圖分類號：TM561 文獻標識碼：A 文章編號：1007-3175(2017)12-0059-04
Analysis and Study of Drive Cam of High-Voltage Circuit Breaker
LI Peng, LIU Yong-qing, LI Chang-peng, TANG Qing-shuang
（XJ-Driescher Wegberg Electric Co., Ltd, Xuchang 461000, China）
Abstract: Force analysis was made to the cam and roller in the process of circuit breaker closing to obtain the cam pressure angle α and the function relationship between the overrun and the cam angle β, so as to make the force received from the roller express as a function of cam angle β. MATLAB was used to draw the function relationship diagram between the force and cam angle β, and ADAMS was used to carry out the dynamics simulation for the cam model that conformed to the actual situation. The theoretical calculation was close to the result of the simulated analysis. This result could be used in analyzing the cam bearing, the design of related parts and the intensity check, which provides a theoretical basis for matching the spring force output characteristics of circuit breaker mechanism and the load characteristics of circuit breaker.
Key words: breaker; cam; function relationship; dynamics simulation
參考文獻
[1] 李世蕓，鄧榮兵. 高壓斷路器凸輪- 軸承碰撞過程動態仿真及應用[J]. 高壓電器，2008，44(6)：497-500.
[2] 張應中，徐可新，閻崇毅，等. 高壓斷路器彈簧操動機構的優化與仿真[D]. 大連：大連理工大學，2012.
[3] 閆靜， 馬志瀛， 金黎. 真空斷路器彈簧操動機構中凸輪機構的優化設計[J]. 電氣制造，2006，40(9)：27-29.
[4] 潘健. 三軸轉臺結構靜動態特性分析與動力學仿真[D]. 上海：上海交通大學，2009.
[5] 吳祉群，李建原. 靜壓導軌油腔數量對運動精度影響的分析仿真[J]. 機械設計與制造，2013(8)：260-262.
