Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 往年索引

基于模擬試驗的高壓電纜狀態仿真平臺功能分析

來源:電工電氣發布時間:2018-02-13 09:13 瀏覽次數:667
基于模擬試驗的高壓電纜狀態仿真平臺功能分析
 
蔣愉寬,童鈞,劉浩軍,王少華,周象賢,李特,楊勇
(國網浙江省電力公司電力科學研究院,浙江 杭州 310014)
 
    摘 要:針對高壓電纜缺陷狀態開展模擬試驗研究,設計搭建了高壓電纜狀態仿真平臺。該仿真平臺由升壓單元、電纜模型單元、升流單元和控制測量單元組成,集成了局部放電、溫度、接地電流等在線監測裝置,可模擬制作各類主絕緣、半導電、接地系統及絕緣件缺陷。針對仿真平臺各組成部分功能,通過精度校驗和試驗校核,分析驗證其試驗、檢測能力,確保試驗結果的準確性和精確性。分析結果表明,該仿真平臺具備模擬高壓電纜各類絕緣缺陷并進行檢測分析、狀態評估的能力。
    關鍵詞:高壓電纜;缺陷仿真;檢測技術;功能分析
    中圖分類號:TM247     文獻標識碼:A     文章編號:1007-3175(2018)02-0050-06
 
Functional Analysis of High-Voltage Cable Simulation Platform Based on Analog Experiment
 
JIANG Yu-kuan, TONG Jun, LIU Hao-jun, WANG Shao-hua, ZHOU Xiang-xian, LI Te, YANG Yong
(State Grid Zhejiang Electric Power Research Institute, Hangzhou 310014, China)
 
    Abstract: According to the simulation experiment of the high voltage cable defect state, this paper designed and constructed a high voltage cable state simulation platform. The simulation platform included booster unit, cable model unit, up-flow unit and control-measure unit and integrated partial discharge, temperature and ground current etc online monitoring devices, being able to simulate various types of main insulation, semi-conductive layer, grounding system and insulation defects with measurement. In view of the function of each component of the simulation platform, the accuracy of the test results are verified and analyzed through the verification of the accuracy and test. The analysis results show that the simulation platform has the ability to simulate all kinds of insulation defects of high voltage cables, and to detect, analyze and evaluate the status.
    Key words: high-voltage cable; defect simulation; detection technology; functional analysis
 
參考文獻
[1] 夏榮,趙健康,歐陽本紅,等. 阻尼振蕩波電壓下110 kV交聯電纜絕緣性能檢測[J]. 高電壓技術,2010,36(7):1753-1760.
[2] 劉蓉,李繼勝,田維堅,等. XLPE電力電纜典型缺陷局部放電測量與分析[J]. 高壓電器,2015,51(2):44-50.
[3] 江秀臣,蔡軍,董小兵,等.110 kV及以上電壓等級交聯電纜在線監測技術[J]. 電力自動化設備,2005,25(8):13-17.
[4] 李錳,張盈利,陳蕾,等. 固體絕緣氣隙局部放電模型構建與仿真研究[J]. 電瓷避雷器,2013(2):31-35.
[5] 周遠翔,聶瓊,姜綠先,等. 針尖曲率半徑對硅橡膠電樹枝老化特性的影響[J]. 中國電機工程學報,2008,28(34):27-32.
[6] 鄭曉泉,CHEN G,DAVIES A E. 交聯聚乙烯電纜絕緣中的雙結構電樹枝特性及其形態發展規律[J].中國電機工程學報,2006,26(3):79-85.
[7] 韋斌,李穎. 基于V H F 的交聯電纜附件局放檢測的研究[J]. 高電壓技術,2006,32(2):30-31.
[8] 郭燦新,張麗,錢勇,等. XLPE電力電纜中局部放電檢測及定位技術的研究現狀[J]. 高壓電器,2009,45(3):56-60.
[9] 張濤,雷勇,朱英偉,等. 基于非線性的水樹老化XLPE電纜絕緣狀態評估[J]. 絕緣材料,2017,50(2):46-52.
[10] 姜蕓,閔虹,夏榮,等. 高壓交聯電纜接頭局部放電的電容耦合法檢測及分析[J]. 高電壓技術,2010,36(8):2005-2011.
[11] 陸國俊,熊俊,李光茂,等. 振蕩波電壓下XLPE電纜局部放電模式識別研究[J]. 高壓電器,2017,53(2):95-100.
[12] 廖雁群,惠寶軍,夏榮,等.110 kV電纜中間接頭及本體典型缺陷局部放電特征分析[J]. 絕緣材料,2014,47(5):60-67.
[13] 吳科,周凱,宋永佳,等. 負荷變化對電纜終端局部放電行為的影響研究[J]. 絕緣材料,2016,49(4):61-68.
[14] 唐炬,李偉,楊浩,等. 高壓電纜附件局部放電超高頻檢測與分析[J]. 高電壓技術,2009,35(7):1571-1577.
[15] 周凱,李旭濤,黃華勇,等. 電纜終端安裝刀痕缺陷的局部放電特性分析[J]. 電力系統保護與控制,2013,41(10):104-110.