Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 文章瀏覽排名

鋼鐵企業電力微網智能化技術應用

來源:電工電氣發布時間:2018-04-19 09:19 瀏覽次數:706
鋼鐵企業電力微網智能化技術應用
 
蔡志全,田冬明,王少沖,王曉慶
(首鋼京唐鋼鐵聯合有限責任公司,河北 唐山 063200)
 
    摘 要:針對大型鋼鐵企業電力微網的綜合自動化和智能化的技術問題,通過理論和模擬并結合生產實際,采用電力微網智能故障分析診斷與預警技術及電力系統負荷預測等高級應用軟件,來實現電網運行方式的規劃研究、智能控制和解決目前電網存在的客觀問題。該技術促進了發電、變電、用電的安全性、可靠性和經濟性,并達到提高電能質量的目的。
    關鍵詞:鋼鐵企業;電力微網;智能;負荷預測;電能質量
    中圖分類號:TM76     文獻標識碼:A     文章編號:1007-3175(2018)04-0040-04
 
Application of Intelligent Technology of Power Microgrid in Iron and Steel Enterprises
 
CAI Zhi-quan, TIAN Dong-ming, WANG Shao-chong, WANG Xiao-qing
(Shougang Jingtang United Iron and Steel Joint Co., Ltd, Tangshan 063200, China)
 
    Abstract: Aiming at the comprehensive automation and intelligent technical problems of power microgrid in large iron and steel enterprises, by the theory and simulation and the combination of production reality, this paper adopted the advanced application software of power microgrid intelligent fault analysis diagnosis, the early warning technology and the power system load forecasting to realize the planning study and intelligent control of the grid operation mode and to solve the existing objective problems in power microgrid, which promotes the safety, reliability and economy of power generation, substation and electricity, and reaches the purpose of improving power quality.
    Key words: iron and steel enterprise; power microgrid; intelligent; load forecasting; power quality
 
參考文獻
[1] 王金祥,沈軍. 基于成本分析的自發電負荷優化方法研究與應用[J]. 冶金動力,2012(4):1-4.
[2] 劉自南,郝飛,沈軍,等. 鋼鐵企業月考核功率因數修正及系統研究[J]. 內蒙古科技大學學報,2015,34(4):401-404.
[3] 李賀昌,沈軍. 京唐鋼鐵供電系統無功優化運行方案的研究[J]. 冶金動力,2013(1):10-12.
[4] 汪國川,燕飛,趙起國,等. 首鋼京唐時間同步系統的建設及應用[J]. 冶金自動化,2014,38(6):17-22.
[5] 張超. 同步相量測量單元PMU的研究[D]. 南寧:廣西大學,2007.