Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 文章瀏覽排名

超高速隔離開關用氣液復合緩沖器研究與試驗

來源:電工電氣發布時間:2018-09-13 10:13 瀏覽次數:716
超高速隔離開關用氣液復合緩沖器研究與試驗
 
劉彬,劉國偉,楊兵,許元震,熊杰
(南京南瑞繼保電氣有限公司,江蘇 南京 211102)
 
    摘 要:超高速機械開關配備有效的緩沖器可以降低開關開啟關閉過程中的沖擊力,提高開關的絕緣性能及機械壽命。結合超高速隔離開關的需求,分析了該高速緩沖器的緩沖參數,對氣液阻尼模型進行研究,研發了一款氣液復合型緩沖器,經過性能測試及樣機試驗,達到3 000以上壽命次數,能夠滿足超高速隔離開關的工程應用需求。
    關鍵詞:高速隔離開關;沖擊;復合緩沖器;液體阻尼;性能建模
    中圖分類號:TM564.1     文獻標識碼:A     文章編號:1007-3175(2018)09-0052-04
 
Study and Test of a Gas-Liquid Mixed Buffer for Ultra High Speed Isolating Switch
 
LIU bin, LIU Guo-wei, YANG Bing, XU Yuan-zhen, XIONG Jie
(Nari-Relays Electric Co., Ltd, Nanjing 2111 02, China)
 
    Abstract: The ultra high speed isolating switch equipped with effective bumpers could lower the impact during the process of switches making and breaking and improve the insulativity of switches and mechanical life. Combining with the requirements of ultra high speed switch, this paper analyzed the parameter of this high-speed buffer and researched on the gas-liquid damping model. A gas-liquid composite buffer was developed. The performance and prototype tests reach more than 3000 times of life, so that it can meet the demand of ultra high speed switch application.
    Key words: high speed isolating switch; impact; composition buffer; liquid damping; performance modeling
 
參考文獻
[1] 馬薇,孫榮耀,王盼盼,等. 海上風電機組吊裝液壓緩沖器仿真研究[J]. 品牌與標準化,2014(8):57-59.
[2] 烏建中,郭慶廣,張珍. 海上風力發電機組的整體軟著陸安裝[J]. 科技導報,2009,27(22):57-59.
[3] 黃運華,李芾,傅茂海. 車輛緩沖器特性研究[J]. 中國鐵道科學,2005,26(5):95-99.
[4] 劉松,高躍飛,信義兵,等. 迫擊炮發射載荷緩沖技術研究[J]. 火炮發射與控制學報,2016,37(6):23-27.
[5] DUYM S, STIENS R, REYBRIUCK K.Evaluation of Shock Absorber Models[J].Vehicle SystemDynamics,1997,27(2):109-127.
[6] DUYM S. Simulation tools modeling and identification for an automotive shock absorber in the context of vehicle dynamics[J].Vehicle System Dynamics,2000,33(4):261-285.
[7] RAYMOND MARTHA K.Shock absorber takes the heat[J]. Machine Design,1997,69(4):64-64.
[8] MURAIL B N, 俞小琴. 液壓缸緩沖的分析[J]. 液壓與氣動,1980(2):54-57.
[9] MINDLIN R D. Dynamics of package cushioning[J]. Bell System Technical Journal,1945,24:353-461.
[10] GUNTUR R R, SANKAR S. Performance o f differern kinds of dual-phase damping shock mounts[J]. Journal of Sound and Vibration,1982,84(2):253-267.
[11] HUNDAL M S.Response of shock isolators with linear and quadeatic damping[J]. Journal of Sound and Vibration,1981,76(2):273-281.
[12] SHEKHAR N C, HARWAL H, MALLIK A K.Response of non-linear dissipative shock isolators[J]. Journal of Sound and Vibration,1998,214(4):589-603.
[13] 武曉鳳,趙秋霞,姚平喜. 液壓缸復合緩沖結構及緩沖過程的分析[J]. 液壓與氣動,2013(3):23-26.