Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 文章瀏覽排名

大電流固封極柱溫升問題分析

來源:電工電氣發布時間:2018-11-20 13:20 瀏覽次數:711
大電流固封極柱溫升問題分析
 
王小麗1,楊海鋒2,王鵬1,紀江輝1
(1 許繼集團有限公司,河南 許昌 461000;2 許昌許繼風電科技有限公司,河南 許昌 461000)
 
    摘 要:固封極柱的固封式結構,導致導電體長期通電產生的熱量無法散出,溫升高引起絕緣失效成為固封極柱絕緣失效的主要原因。從影響溫升的主要因素進行分析,提出減小主回路電阻、采用導電性好的材料、增加散熱面積等溫升解決方案。通過固封極柱溫升試驗及方案優化,驗證了解決方案的可行性,并得出軟連接方案在解決大電流固封極柱溫升方面更具有優勢。
    關鍵詞:固封極柱;主回路電阻;導電材料;散熱面積;軟連接
    中圖分類號:TM561.2     文獻標識碼:B     文章編號:1007-3175(2018)11-0056-04
 
Analysis of Temperature Rise Problem of Large Current Embedded Pole
 
WANG Xiao-li1, YANG Hai-feng2, WANG Peng1, JI Jiang-hui1
(1 XJ Group Corporation, Xuchang 461000, China; 2 XJ Wind Power Technology Co., Ltd, Xuchang 461000, China)
 
    Abstract: The solid sealing structure of embedded pole leads to not dissipating the heat generated by the long-term conduction of the conductor. The high temperature rising is the main reason for the insulation failure of embedded pole. Based on the analysis of the main factors influencing on the temperature rising, this paper proposed the solutions such as reducing the circuit resistance, using conductive materials with good conductivity and increasing the heat radiation area. Through the temperature rising test and scheme optimization of the solid sealed pole, the feasibility of the scheme was verified.It is concluded that the high-current solid-blocking pole soft connection scheme has more advantages in solving the temperature rising problems.
    Key words: embedded pole; main circuit resistance; conductive materials; heat radiation area; soft connection
 
參考文獻
[1] 紀江輝,張杰,王小麗,等.40.5 kV固封極柱的設計及工藝優化[J]. 電工電氣,2016(12):52-55.
[2] 吳建紅,葛樂矣,王福潤,等. 中壓固體絕緣環氧樹脂APG制造新工藝[J]. 電工電氣,2015(1):47-50.
[3] 中國國家標準化管理委員會. 高壓開關設備和控制設備標準的共用技術要求:GB/T 11022—2011[S]. 北京:中國標準出版社,2012:22-23.
[4] 黎斌.SF6高壓電器設計[M]. 3 版. 北京:機械工業出版社,2010.
[5] 國家能源局. 高壓開關設備和控制設備標準的共用技術要求:DL/T 593—2016[S]. 北京:中國電力出版社,2016:46.
[6] 張正周,宋新峰,獨田娃,等. 彈簧觸頭設計Ⅲ [J]. 高壓電器,2011,47(5):87-91.