Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 往年索引

核電站中壓電氣貫穿件電氣試驗參數選擇探討

來源:電工電氣發布時間:2018-11-20 13:20 瀏覽次數:732
核電站中壓電氣貫穿件電氣試驗參數選擇探討
 
俞高偉1,張甬2
(1 上海發電設備成套設計研究院有限責任公司,上海 200240;2 中廣核工程有限公司,廣東 深圳 518124)
 
    摘 要:以防城港二期核電工程電氣貫穿件相關技術要求為基礎,介紹了華龍一號核電站電氣貫穿件的功能,比對了GB/T 13538—2017、IEEE 317-2013、GB/T 25837—2010等相關標準對中壓電氣貫穿件的要求,探討中壓電氣貫穿件電氣試驗的參數選擇,以期為電氣貫穿件的國產化的設計、制造和鑒定提供借鑒和參考。
    關鍵詞:華龍一號核電站;電氣貫穿件;工頻耐壓試驗;脈沖電壓試驗;局部放電試驗
    中圖分類號:TM506     文獻標識碼:B     文章編號:1007-3175(2018)11-0049-03
 
Discussion on Selection of Electric Test Parameters of Medium Voltage Electrical Penetration
Assembly in Nuclear Power Plant
 
YU Gao-wei1, ZHANG Yong2
(1 Shanghai Power Equipment Research Institute Co., Ltd, Shanghai 200240, China;
2 China Nuclear Power Engineering Co., Ltd, Shenzhen 518124, China)
 
    Abstract: Based on the relevant technical requirements of electrical penetration assembly of Fangchenggang second phase nuclear power project, this paper introduced the function of electrical penetration assembly of Hua-long pressurized reactor and compared the different requirements of GB/T 13538—2017, IEEE 317-2013, GB/T 25837—2010 and other related standards for medium voltage electrical penetration assembly, discussing the selection of parameters for electric test of medium voltage electrical penetration assembly, which provides the references for the design, manufacture and identification of localized electrical penetration assembly.
    Key words: HPR1000 (Hua-long pressurized reactor); electrical penetration assembly; power frequency voltage test; impulse voltage test; partial discharge test
 
參考文獻
[1] 中國電力企業聯合會. 核電站安全殼電氣貫穿件:GB/T 13538—2017[S]. 北京:中國標準出版社,2017:10-11.
[2] 中國電力企業聯合會. 交流電氣裝置的過電壓保護盒絕緣配合設計規范:GB/T 50064—2014[S]. 北京:中國計劃出版社,2014:7-45.
[3] 俞高偉,胡子嬰,吳珂科,朱小平AP1000中壓電氣貫穿件合格鑒定電氣試驗要求[J]. 發電設備,2013,27(2):142-144.
[4] 鄭開云. 核電廠中壓電氣貫穿件短路電動力試驗探討[J]. 電工電氣,2017(6):51-54.