核電站嚴重事故下電氣貫穿件鑒定的研究
俞高偉1，馬濤2，孫健1，萬青1，吳珂科1
（1 上海發電設備成套設計研究院有限責任公司，上海 200240；2 上海核工程研究設計院有限公司，上海 200233）
摘 要：設備鑒定是核電站安全的重要保證。介紹了核電站安全殼電氣貫穿件，研究了電氣貫穿件的相關標準，比較了不同標準在嚴重事故下對電氣貫穿件的鑒定要求，并結合AP1000、EPR、華龍一號等三代核電站的具體實踐，明確電氣貫穿件嚴重事故條件下的鑒定實施，為核電站其他設備鑒定提供了借鑒。
關鍵詞：核電站；電氣貫穿件；嚴重事故；設備鑒定
中圖分類號：TM623 文獻標識碼：A 文章編號：1007-3175(2019)06-0063-04
Study on Qualification of Electric Penetration Assembly under Severe Accidents in Nuclear Power Plant
YU Gao-wei1, MA Tao2, SUN Jian1, WAN Qing1, WU Ke-ke1
（1 Shanghai Power Equipment Research Institute Co., Ltd, Shanghai 200240, China;
2 Shanghai Nuclear Engineering Research and Design Institute Co., Ltd, Shanghai 200233, China）
Abstract: Qualification of equipment is an important guarantee for nuclear power plants. Introduction was made to the containment electric penetration assembly in nuclear power station. This paper studied the relevant standards of the electrical penetration assembly, compared to the identification requirements of the electrical penetration assembly in different standards about severe accidents, and combined with the concrete practice of the three generations of nuclear power plants such as AP1000, EPR, Hua-long No. 1 etcthree generations nuclear power station concrete practice. The qualification and implementation under the condition of severe accident of electrical penetrating parts were clarified to provide references for the qualification of other equipment in nuclear power plant.
Key words: nuclear power plant; electric penetration assembly; severe accidents; qualification of equipment
參考文獻
[1] 國家核安全局. 核動力廠設計安全規定：HAF 102—2016[S]. 北京：法律出版社，2016：28-29.
[2] 龔釗，李棟梁. 三代核電站嚴重事故下設備鑒定的研究[J]. 中國高新技術企業，2013(24)：104-106.
[3] 孫造占，初起寶，房永剛，張?jiān)撇? 嚴重事故下設備可用性論證要求[J]. 核安全，2014，13(1)：20-27.
[4] 鄭開云，楊曉，陳智. 基于IEEE標準的電氣貫穿件鑒定試驗研究[J]. 核安全，2016，15(2)：70-76.
[5] Nuclear Power Engineering Committee.IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations：IEEE 317—2013[S].New York: IEEE Standard Association，2013：18-19.
[6] AFCEN.Design and Construction Rules for Electrical Components of Nuclear Islands： RCC-E 2005[S].Paris: French Society for Design and Construction Rules for Nuclear Island Components，2005：54-55.
