Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 往年索引

智能變電站集中式測控關鍵技術研究及應用

來源:電工電氣發布時間:2019-10-17 09:17 瀏覽次數:645
智能變電站集中式測控關鍵技術研究及應用
 
龔世敏,唐斌,洪瑩,張林,趙謙,蔡亮亮
(國電南京自動化股份有限公司,江蘇 南京 211100)
 
摘 要:針對當前智能變電站自動化系統設備現狀背景及存在的問題,從技術發展趨勢上闡述了集中式測控技術研究的必要性。介紹了集中式測控的軟硬件架構方案,分析了集中式測控實現的關鍵技術及難點,并給出工程應用實施方案。經濟性分析對比表明,采用集中式測控技術可以較好地對現有二次設備進行優化整合,減少設備配置,降低設備調試維護工作量,提升了變電站建設經濟效益。
關鍵詞:智能變電站;集中式測控;就地化
中圖分類號:TM63;TM734 文獻標識碼:B 文章編號:1007-3175(2019)10-0029-07
 
Research and Application of Key Technology of Centralized Measurement and Control in Smart Substation
 
GONG Shi-min, TANG Bin, HONG Ying, ZHANG Lin, ZHAO Qian, CAI Liang-liang
(Guodian Nanjing Automation Co., Ltd, Nanjing 2111 00, China)
 
    Abstract: Aiming at the current situation and existing problems of smart substation automation system, this paper expounded the necessity of centralized technology research from the trend of technology development. Introduction was made to the architecture of software and hardware for the centralized measurement and control. This paper analyzed the key technology and difficulty of realizing centralized measurement and control, giving the project application implementation plan. The comparison of economy analysis shows that the centralized monitoring and control technology can be used to optimize the integration of the second-equipment, to enhance the economic benefits of substation construction and to greatly reduce the equipment configuration and the equipment debugging and maintenance workload.
    Key words: smart substation; centralized measure and control device; localization
 
參考文獻
[1] 國家電網公司. 智能變電站技術導則:Q/GDW 383—2009[S]. 北京:中國電力出版社,2009:2-12.
[2] 倪益民,楊宇,樊陳,等. 智能變電站二次設備集成方案討論[J]. 電力系統自動化,2014,38(3):194-199.
[3] 李瑞生, 李燕斌, 周蜂權. 智能變電站功能架構及設計原則[J]. 電力系統保護與控制,2010,38(21):24-27.
[4] 宋璇坤,李敬如,肖智宏,等. 新一代智能變電站整體設計方案[J]. 電力建設,2012,33(11):1-6.
[5] 中國電力企業聯合會. 電力自動化通信網絡和系統第9-2 部分:特定通信服務映射( SCSM )——基于ISO/IEC 8802-3 的采樣值:DL/T 860.92—2016[S].北京:中國電力出版社,2006:2-12.
[6] 李孟超,允平,李獻偉,等. 智能變電站及技術特點分析[J]. 電力系統保護與控制,2010,38(18):59-62.
[7] 韓偉, 楊小銘, 仇新宏, 等. 基于數字化采樣的集中式保護裝置[J]. 電力系統自動化,2010,34(11):101-104.
[8] 孫一民,劉永新,章立宗,等. 智能變電站測控功能集中式冷備用裝置的研制[J]. 電力系統自動化,2015,39(18):97-100.