一起220 kV線路跳閘的監控信息分析
趙斌1，王興濤1，王佳偉1，張亞飛2
（1 國網新疆電力有限公司奎屯供電公司，新疆 奎屯 833200;2 新疆農業大學 電氣工程學院，新疆 烏魯木齊 830002）
摘 要：當變電站端遠動裝置主通道與備用通道之間在配合上出現問題時，變電站端遠動裝置會向調度端監控系統上送報文信息，影響調度監控人員對變電站的正常監視?；谀匙冸娬疽黄?20 kV線路跳閘事故時的調度端報文，對報文中存在的備通道補現象進行原因分析，確定為設備硬件原因?qū)е逻@一現象，經更換遠動裝置通信板插件后，問題得以解決，為同一類型廠站端自動化系統缺陷處理提供參考。
關鍵詞：變電站監控系統；線路跳閘；遠動裝置；主通道；備用通道；報文
中圖分類號：TM726 文獻標識碼：B 文章編號：1007-3175(2020)02-0043-03
Analysis of Monitoring Information of a 220 kV Line Trip
ZHAO Bin1, WANG Xing-tao1, WANG Jia-wei1, ZHANG Ya-fei2
（1 Kuitun Electric Power Supply Company of State Grid Xinjiang Power Co., Ltd, Kuitun 833200, China;
2 School of Mechanical and Electrical Engineering, Xinjiang Agricultural University, Urumqi 830002, China）
Abstract: When there is a problem in the coordination between the main channel and the backup channel of the substation terminal remote control device, the substation terminal remote control device will send message information to the dispatching terminal monitoring system, so as to affect the regular substation monitoring of dispatching monitoring personnel. Based on the dispatching terminal message of a 220 kV line trip accident, this paper analyzed the causes of the alternate channel filling phenomenon in the message, making sure that it was the hardware of the device. After the remote control device changed, the problem could be solved, which provides the reference for the same type of factory station automation system defect treatment.
Key words: substation monitoring system; line tripping; remote control device; main channel; alternate channel; message
參考文獻
[1] 苗彬. 淺論無人值守變電站的運維管理技術[J].中國新技術新產品，2017(21)：77-78.
[2] 翁水，王鵬程. 視頻監控系統在無人值守變電站的應用[J]. 科技資訊，2014(36)：81-82.
[3] 李茶根，楊晟，曾勝瑋，等. 圖像智能化分析技術在無人值守變電站安全監控中的應用[J]. 電子技術與軟件工程，2016(17)：82-83.
[4] 郜勇琴. 變電站綜合自動化系統后臺信息分析[M].北京：中國電力出版社，2009.
[5] 曹茂昇，高伏英. 電網調度自動化廠站端調試檢修[M]. 北京：中國電力出版社，2012.
[6] 潘鵬飛，潘鳴飛，朱亮亮，等. 遠動工控機與通道的切換技術[J]. 電網技術，2006，30( S2)：407-410.
[7] 夏敏. 變電站遠動通道中斷的檢測方法[J]. 電力安全技術，2014，16(1)：46-47.
[8] 袁波. 變電站遠動通道通信中斷常見故障原因及處理[J]. 科技創新與應用，2015(1)：29-30.
