Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 文章瀏覽排名

基于不抽轉子的發電機大修狀態評估測試方法及裝置

來源:電工電氣發布時間:2020-06-18 13:18 瀏覽次數:920
基于不抽轉子的發電機大修狀態評估測試方法及裝置
 
楊玉磊
(中國大唐集團科學技術研究院有限公司華東電力試驗研究院,安徽 合肥 230088)
 
    摘 要:在梳理發電機大修所需開展的檢修和試驗項目的基礎上,提出了一種發電機大修狀態評估測試方法,該方法以利用轉子護環端部進行固定的分段拼接式塑料導軌和定制式載具為試驗工具,配合高清補光型變焦距攝像頭、Chattock線圈和定子槽楔松緊度檢測探頭等傳感器和測量設備,實現了無氣隙擋板發電機在不抽轉子條件下完成大修狀態評估測試的目的?,F(xiàn)場應用測試表明,該裝置效果良好,應用前景廣闊。
    關鍵詞:發電機;狀態評估;不抽轉子;導軌;無氣隙擋板
    中圖分類號:TM307     文獻標識碼:B    文章編號:1007-3175(2020)06-0054-05
 
Method and Device for Evaluating and Overhauling Generator Based on Non-Pumped Rotor
 
YANG Yu-lei
(China Datang Science and Technology Research Institute Co., Ltd. East China Electric Power Experimental Research Institute, Hefei 230088, China)
 
    Abstract: On the basis of reviewing the overhaul and test items required for generator overhaul, a method for assessing the condition of generator overhaul is proposed. This method uses fixed segmented spliced plastic guide rails and the custom-made vehicle as a test tool, with sensors and measuring equipment such as HD fill light zoom camera, Chattock coil and stator slot wedge tightness detection probe, etc., and the purpose of the air gap-free baffle generator to complete the overhaul condition evaluation test without pumping the rotor is achieved. Field application tests show that the device works well and has broad application prospects.
    Key words: generator; condition assessment; no pumping rotor; guide rail; air gap-free baffle
 
參考文獻
[1] 電力行業電機標準化委員會. 水氫氫冷汽輪發電機檢修導則 第1 部分:總則:DL/T 1766.1—2017[S]. 北京:中國電力出版社,2017:1-3.
[2] 中國電力企業聯合會標準化中心. 燃煤火力發電企業設備檢修導則:DL/T 838—2017[S]. 北京:中國電力出版社,2017:14-19.
[3] 張新利,霍峰.630 MW發電機抽轉子工藝革新[J].設備管理與維修,2017(15):70-71.
[4] 李向勇.300 MW機組發電機抽穿轉子施工工藝[J].設備管理與維修,2015(11):103.
[5] 鄒啟娟. 淺談行車在抽發電機轉子時的應用[J]. 科技經濟市場,2013(8):18-19.
[6] 薛卉,陳忠. 用于發電機檢測的特種機器人[J]. 裝備機械,2013(3):9-13.
[7] 賈志東,白雨,張征平,等. 用于發電機定子鐵芯的鐵芯損傷電磁感應檢測法檢測原理分析[J]. 高電壓技術,2015,41(1):123-131.
[8] 高勝強,賈志東,彭翔. 基于DSP的大型發電機槽楔松動檢測系統[J]. 中國電力,2009,42(1):70-74.
[9] 賈志東,夏英來,鄧禹,等. 大型發電機定子槽楔松動的動力學分析與檢測[J]. 中國電機工程學報,2011,31(15):107-113.