Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 往年索引

基于國網標準化設計要求的空氣絕緣環網柜開發

來源:電工電氣發布時間:2020-12-18 15:18 瀏覽次數:614
基于國網標準化設計要求的空氣絕緣環網柜開發
 
黃小軍,王繼龍,唐敏
(正泰電氣股份有限公司,上海 201614)
 
    摘 要:通過對國家電網公司12 kV空氣絕緣環網柜標準化設計技術規范要求解讀分析,并基于其主要技術指標給出12 kV空氣絕緣環網柜產品的設計方案,該設計方案重點為雷電沖擊耐受電壓、局放值兩個關鍵技術參數,并從環網柜的絕緣水平、整機局放值兩方面進行把控,制定科學的生產工藝規范。通過樣機試驗驗證,實現了該產品在電氣絕緣性能和局部放電指標方面滿足了技術和批量生產要求,提升了設備運行的可靠性。
    關鍵詞:空氣絕緣環網柜;絕緣水平;局部放電;型式試驗
    中圖分類號:TM591     文獻標識碼:B     文章編號:1007-3175(2020)12-0066-05
 
Development of Air Insulation Ring Network Cabinet Based on the Standard Design Requirements of State Grid
 
HUANG Xiao-jun, WANG Ji-long, TANG Min
(Chint Electric Co., Ltd, Shanghai 201614, China)
 
    Abstract: Through the interpretation and analysis of the technical specifications for the standardized design of the 12 kV air-insulated ring main unit of the State Grid Corporation of China, and based on its main technical indicators, the design plan of the 12 kV air-insulated ring main unit products is given. The design plan focuses on two key technical parameters of lightning impulse withstand voltage and partial discharge value, and controls the insulation level of the ring main unit and the partial discharge value of the whole machine to formulate scientific production process specifications. Through prototype test verification, it is realized that the product meets the technical and mass production requirements in terms of electrical insulation performance and partial discharge indicators, and improves the reliability of equipment operation.
    Key words: air-insulated ring main units; insulation level; partial discharge; type test
 
參考文獻
[1] 鄧曉鳴.10 kV環網開關柜常見故障及處理方法探討[J]. 機電信息,2016(33):68-69.
[2] 姚淮林, 吳秋亮, 宋淼, 等.17.5 kV開關柜雷電沖擊試驗擊穿原因分析與優化[J]. 電工電氣,2018(12):55-57.
[3] 李建軍,應兵榮.40.5 kV開關柜絕緣缺陷分析及解決措施[J]. 電氣開關,2016,54(2):106-108.
[4] 李昊威. 論潮濕環境下封閉式高壓開關柜防潮[J].農村電氣化,2016(10):23-24.