基于國網標準化設計要求的空氣絕緣環網柜開發

 

黃小軍，王繼龍，唐敏

（正泰電氣股份有限公司，上海 201614）

 

    摘 要：通過對國家電網公司12 kV空氣絕緣環網柜標準化設計技術規范要求解讀分析，并基于其主要技術指標給出12 kV空氣絕緣環網柜產品的設計方案，該設計方案重點為雷電沖擊耐受電壓、局放值兩個關鍵技術參數，并從環網柜的絕緣水平、整機局放值兩方面進行把控，制定科學的生產工藝規范。通過樣機試驗驗證，實現了該產品在電氣絕緣性能和局部放電指標方面滿足了技術和批量生產要求，提升了設備運行的可靠性。

    關鍵詞：空氣絕緣環網柜；絕緣水平；局部放電；型式試驗

    中圖分類號：TM591     文獻標識碼：B     文章編號：1007-3175(2020)12-0066-05

    Abstract: Through the interpretation and analysis of the technical specifications for the standardized design of the 12 kV air-insulated ring main unit of the State Grid Corporation of China, and based on its main technical indicators, the design plan of the 12 kV air-insulated ring main unit products is given. The design plan focuses on two key technical parameters of lightning impulse withstand voltage and partial discharge value, and controls the insulation level of the ring main unit and the partial discharge value of the whole machine to formulate scientific production process specifications. Through prototype test verification, it is realized that the product meets the technical and mass production requirements in terms of electrical insulation performance and partial discharge indicators, and improves the reliability of equipment operation.

    Key words: air-insulated ring main units; insulation level; partial discharge; type test