大型電力變壓器油箱制作工藝改進分析
莊飛,方向紅,李亮
(正泰電氣股份有限公司, 上海 201614)
摘 要:隨著變壓器容量及電壓等級的提高,油箱的外形尺寸及承載能力面臨更高的要求。對傳統變壓器油箱制作工藝進行分析,并闡述一種改進型油箱模塊化制作工藝。對模塊化改進工藝的工藝流程與內容、工藝優點及實施難點進行了說明和分析,采用改進型變壓器油箱制作工藝,實現了油箱箱沿、箱壁、箱蓋、下節油箱等組部件的模塊化生產,大幅度提高了生產效率,并降低了作業難度。
關鍵詞:變壓器油箱;模塊化;制作工藝
中圖分類號:TM41 文獻標識碼:B 文章編號:1007-3175(2021)05-0056-03
Analysis of the Improvement of Manufacturing Process of
Large Transformer Tank
ZHUANG Fei, FANG Xiang-hong, LI Liang
(Chint Electric Co., Ltd, Shanghai 201614, China)
Abstract: As the transformer capacity and voltage level grows, the shape, size and bearing capacity of a transformer tank are facing higher requirements. In this paper, traditional manufacturing process of the transformer tank is analyzed, and an improved modular manufacturing process of the tank is introduced. The manufacturing procedures, the advantages and operational difficulties of this improved, modular production are described and analyzed. This kind of improved manufacturing process achieves the modular production of various parts of transformer tank, like tank edge, tank wall, tank cover, and lower tank, improving the production efficiency greatly and reducing the difficulty of
operation.
Key words: transformer tank; modular; manufacturing process
參考文獻
[1] 謝毓城. 電力變壓器手冊[M] . 北京:機械工業出版社,2014.
[2] 趙靜月. 變壓器制造工藝[M] . 北京:中國電力出版社,2009.
[3] 變壓器制造技術叢書編審委員會. 變壓器油箱制造工藝[M]. 北京:機械工業出版社,2006.
[4] 陳祝年. 焊接工程師手冊[M] . 北京:機械工業出版社,2010.