Suzhou Electric Appliance Research Institute
期刊號： CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 往年索引

開繞組永磁同步電機系統有限集模型預測控制研究

來源：電工電氣發布時間：2021-11-19 11:19 瀏覽次數：412

開繞組永磁同步電機系統有限集模型預測控制研究

吳迪1，王影1，華國武2，李明陽1，肖磊1
(1 江蘇海洋大學 電子工程學院，江蘇 連云港 222005；
2 中國礦業大學 電氣與動力工程學院，江蘇 徐州 221116)
 
    摘 要：提出了一種用于開繞組永磁同步電機 (OW-PMSM) 的快速模型預測控制方法，與傳統模型預測電流控制 (MPCC) 相比，在不影響性能的情況下減少了預測的次數和時間。為了提高 OW-PMSM 的轉速響應和抗負載擾動性，提出了單環模型預測控制 (MPC)，將速度環 MPC 和電流環 MPC 組合一起同時進行模型預測控制。仿真結果表明所提出方法能夠有效降低算法復雜度和改善系統控制性能。
    關鍵詞：開繞組永磁同步電機；快速模型預測控制；單環模型預測控制
    中圖分類號：TM351     文獻標識碼：A     文章編號：1007-3175(2021)11-0006-06
 
Research on Finite Set Model Predictive Control of Open Winding
Permanent Magnet Synchronous Motor System
 
WU Di1, WANG Ying1, HUA Guo-wu2, LI Ming-yang1, XIAO Lei1
（1 School of Electronic Engineering, Jiangsu Ocean University, Lianyungang 222005, China;
2 School of Electrical and Power Engineering, China University of Mining and Technology, Xuzhou 221116, China）
 
    Abstract: This paper proposed a way of fast model predictive control, which could be used on open winding permanent magnet synchronous motor(OW-PMSM). Under a non-influence performance situation, this method reduced the frequency and time of the predictable compared to the traditional model predictive current control. For improving the rotational speed reaction and anti-disturbance of the OWPMSM,this study proposed a single-loop model predictive control (MPC). In this way, the speed loop MPC and the current loop MPC has been combined to do the model predictive control experiment. The simulation results show that the proposed method can effectively reduce the algorithm complexity and improve the system control performance.
    Key words: open winding permanent magnet synchronous motor; fast model predictive control; single-loop model predictive control
 
參考文獻
[1] 楊淑英，姚樂，張興，等. 共直流母線開繞組異步電機零序環流抑制策略研究[J] . 中國電機工程學報，2018，38(12) ：3688-3698.
[2] ZHANG X G, LI Y, WANG K Q.Current PredictiveControl for the Semi-Controlled Open-Winding PMSM Generation System[C]//2018 IEEE Energy Conversion Congress and Exposition(ECCE)，2018 ：3476-3482.
[3] LIN X G, HUANG W X, JIANG W.Direct Torque Control for Three-Phase Open-End Winding Permanent Magnet Synchronous Motor Based on Zero-Sequence Current Suppression[C]//2019 22nd International Conference on Electrical Machines and Systems(ICEMS)，2019 ：1-6.
[4] CASADEI D, PROFUMO F, SERRA G, et al.FOC and DTC: Two viable schemes for induction motors torque control[J].IEEE Transactions on Power Electronics，2002，17(5) ：779-787.
[5] ZHANG Y, ZHU J.A Novel Duty Cycle Control Strategy to Reduce Both Torque and Flux Ripples for DTC of Permanent Magnet Synchronous Motor Drives with Switching Frequency Reduction[J].IEEE Transactions on Power Electronics，2011，26(10) ：3055-3067.
[6] NIU F, WANG B S, BABEL A S, et al.Comparative Evaluation of Direct Torque Control Strategies for Permanent Magnet Synchronous Machines[J].IEEE Transactions on Power Electronics，2016，31(2) ：1408-1424.
[7] 李自成，易亞文，王后能，等. 基于有限集電流預測控制的永磁同步電機轉矩脈動抑制[J] . 電機與控制應用，2020，47(8) ：13-18.
[8] WANG W S, FANG Y, CHEN S Y, et al.Finite control set model predictive current control of a five-phase PMSM with virtual voltage vectors and adaptive control set[J].CES Transactions on Electrial Machines and Systems，2018，2(1) ：136-141.
[9] GONZALEZ P, DURAN M J, ACIEGO J J, et al.Model predictive control of six-phase induction motor drives using virtual voltage vectors[J].IEEE Transactions on Industrial Electronics，2018，65(1) ：27-37.
[10] WANG T S, GUO Y G, ZHU J G.Finite-controlset model predictive direct torque control of PMSMs with virtual space vectors[C]//12th IEEE Conference on Industrial Electronics and Applications(ICIEA)，2017 ：1427-1430.
[11] 孫翀. 開繞組永磁同步電機驅動系統優化模型預測控制技術研究[D]. 杭州：浙江大學，2019.
[12] 張永昌. 基于快速矢量選擇的永磁同步電機模型預測控制[J]. 電工技術學報，2016，31(6) ：66-73.