低壓無功補償柜的電磁兼容特性分析
馬曉娟，梁忠生，胡標，孫桂楠，黃名祥，張明明
(庫柏(寧波)電氣有限公司，浙江 寧波 315336)
摘 要：電工電子產品在低壓開關柜中的廣泛應用，使得作為低壓開關柜型式試驗考核項目之一的電磁兼容性 (EMC) 顯得尤為重要。以一臺帶靜止無功發生器 (SVG) 的低壓無功補償柜為例，在整柜的設計過程中，通過合理的元器件選型、屏蔽、濾波、接地等方法的柜體結構設計規避電磁干擾，以保證低壓無功補償柜的電磁兼容特性。經樣機試制與型式試驗考核，驗證了其在設計過程中應重點注意的事項，并就 EMC 試驗過程中出現的問題，給出了故障原因分析及整改舉措。
關鍵詞：低壓無功補償柜；電磁兼容性(EMC) ；屏蔽；濾波；接地
中圖分類號：TM591 文獻標識碼：A 文章編號：1007-3175(2022)01-0049-04
Analysis of EMC Characteristics of the Low Voltage
Reactive Power Compensation Cabinet
MA Xiao-juan, LIANG Zhong-sheng, HU Biao, SUN Gui-nan, HUANG Ming-xiang, ZHANG Ming-ming
（Cooper (Ningbo)Electric Co., Ltd, Ningbo 315336, China）
Abstract: Electrical and electronic products are widely used in low voltage switchgear. Therefore, electromagnetic compatibility (EMC) is one of the vital assessments of the low voltage switchgear type test.In this paper, a low voltage reactive power compensation cabinet with an SVG static reactive power generator has been taken as an example. In the whole cabinet design process, such as reasonable components selection, shielding, filtering, grounding, and other methods are adopted to avoid electromagnetic interference, to ensure the electromagnetic compatibility characteristics of low voltage reactive power compensation cabinet. After prototype trial production and type test assessment, it verified vital points in the design process. It proposes the failure reason analysis and rectification measures for the problems that occurred in the EMC test process.
Key words: low voltage reactive power compensation cabinet; electromagnetic compatibility (EMC); shielding; filtering; grounding
參考文獻
[1] 王永喜，曹洋，張殿英. 低壓電容柜方案設計[J].電氣開關，2010(4) ：45-50.
[2] 沈志剛. 多約束條件下低壓開關柜電磁兼容改造設計分析[J]. 自動化儀表，2021，42(5) ：50-54.
[3] 熊衛斌，王衛紅. 淺議新形勢背景下低壓柜柜體結構的設計[J]. 電氣工程，2017(16) ：109-111.
[4] 張開勇.5G 物聯網模組化開關柜的設計和應用[D].揚州：揚州大學，2021.
[5] 陳浩. 電容補償柜在諧波狀況下優化運行若干問題的探討[D]. 福州：福建農林大學，2006.
[6] 鄭軍奇.EMC 電磁兼容設計與測試案例分析[M]. 北京：電子工業出版社，2018.
