Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 文章瀏覽排名

基于PSCAD4.2軟件的電力系統距離保護仿真分析

來源:電工電氣發布時間:2016-04-06 11:06 瀏覽次數:21

基于PSCAD4.2軟件的電力系統距離保護仿真分析 

彭湃,程漢湘 
(廣東工業大學 自動化學院,廣東 廣州 510006) 
 

摘 要: 分析了輸電線路距離保護的基本原理,并基于PSCAD4.2 軟件搭建了電力系統距離保護仿真模型,設置了輸電線路可能發生的接地故障和相間故障,得出不同故障類型下輸電線路的電壓、電流以及其他量的變化規律的波形,仿真結果表明,利用該軟件建立的模型能夠準確反映距離保護的作用機理,即距離保護裝置能夠快速響應故障信號并動作于斷路器,實現輸電線路的保護。
關鍵詞: PSCAD4.2 軟件;距離保護;接地故障
中圖分類號:TM712 文獻標識碼:A 文章編號:1007-3175(2014)07-0028-04


Simulation Analysis of Power System Distance Protection Based on PSCAD4.2 Software 

PENG Pai, CHENG Han-xiang 
(School of Automation, Guangdong University of Technology, Guangzhou 510006, China) 
 

Abstract: Analysis was made on the basic principle of power transmission line distance protection, this paper built up the distance protection simulation model based on PSCAD4.2 software and set possibly happening grounding faults and faults between phases of the transmission lines, to get waveforms of voltage, current and other change rules transmission line under the conditions of different fault kinds. Simulation result shows that the established model with this software can correctly reflect function mechanism of distance protection, that the distance protection device is able to respond to fault signal fast with action on the circuit breaker, to realize protection of power transmission lines.
        Key words: PSCAD4.2 software; distance protection; grounding fault


參考文獻
[1] 李曉明.Ⅲ段距離保護作為后備保護的性能分析[J].繼電器,2005,33(15):9-12.
[2] 楊蘭,楊廷芳.Matlab/SIMULINK在繼電保護設計中的應用[J].電氣傳動自動化,2006,28(1):53-55.
[3] 劉強.基于Matlab的微機保護原理教學仿真平臺[J].電氣電子教學學報,2007,29(3):95-98.
[4] 索南加樂,許慶強.自適應接地距離繼電器[J].電力系統自動化,2005,29(17):54-58.
[5] 李巖,陳德樹,尹項根,等.新型自適應姆歐繼電器的研究[J].中國電機工程學報,2003,23(1):80-83.
[6] 沈冰,何奔騰,張武軍.新型自適應繼電器[J].電力系統自動化,2007,31(7):39-44.
[7] 李廣凱,李庚銀.電力系統仿真軟件綜述[J].電氣電子教學學報,2005,27(3):61-65.
[8] 李學生.PSCAD建模與仿真[M].北京:中國電力出版社,2013.
[9] 賀家李,李永麗,董新洲,等.電力系統繼電保護原理[M].北京:中國電力出版社,2010.
[10] 張保會,尹項根.電力系統繼電保護[M].北京:中國電力出版社,2005.