Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 文章瀏覽排名

保護操作箱防跳與斷路器機構防跳的比較與選擇

來源:電工電氣發布時間:2016-04-06 14:06 瀏覽次數:17

保護操作箱防跳與斷路器機構防跳的比較與選擇 

鄧家澤1,袁科2

1 廣州市電力工程設計院有限公司,廣東 廣州 510220;2 宜賓市計量測試所,四川 宜賓 644000 
 

摘 要:介紹了微機保護操作箱與斷路器機構箱的工作原理。分析比較了微機保護操作箱防跳、斷路器機構防跳和微機保護操作箱防跳結合斷路器機構防跳在運行工作中的優缺點,建議在控制回路中同時保留微機保護操作箱防跳與斷路器機構箱防跳接線,選擇遠方時采用保護操作箱防跳,就地時采用斷路器機構箱防跳,通過彼此間的切換實現優勢互補,彌補單獨使用某種防跳所帶來的缺陷。
關鍵詞:斷路器;微機保護;防跳
中圖分類號:TM561 文獻標識碼:B 文章編號:1007-3175(2014)10-0028-03


Comparison and Selection of Anti-Bouncing Circuits for Microcomputer Protection and Circuit Breaker 

DENG Jia-ze1, YUAN Ke2 
1 Guang Zhou Electric Power Engineering Design Institute Co., Ltd, Guangzhou 510220, China;
2 Yibin Institute of Measurement and Testing, Yibin 644000, China
 
 

Abstract: Introduction was made to the operating principles of microcomputer protection control box (MPCB) and circuit breaker operation box (CBOB). By analyzing and comparing the advantages and disadvantages of the anti-bounce circuits for MPCB and CBOB, this paper recommended that both of the anti-bounce circuits for MPCB and CBOB should be kept in the control loop. The anti-bounce circuit of MPCB was used for remote control, while the anti-bounce circuit of CBOB was used on site. By switching from one to the other, the complementary advantages achieved, and the defects of single anti-bounce are compensated.
           Key words: circuit breaker; microcomputer protection; anti-bouncing


參考文獻
[1] 文鋒.電氣二次接線識圖[M].北京:中國電力出版社,2000.
[2] 徐春新.防跳繼電器觸點卡滯導致斷路器反復跳躍的問題分析[J].電力系統保護與控制,2009,37(12):115-117.
[3] 兀鵬越,懂志成,陳琨,等.高壓斷路器防跳回路的應用及問題探討[J].電力自動化設備,2010,30(10):106-109.
[4] 陳川,石帥,夏傳幫,等.斷路器防跳回路缺陷分析及處理[J].電工技術,2012(8):72-74.
[5] 曹志輝,張斌.繼電保護防跳回路的對比分析[J].電工技術,2011(3):1-2.
[6] 袁乃志.發電廠和變電站電氣二次回路技術[M].北京:中國電力出版社,2004.
[7] 馮楊州.關于保護裝置防跳回路與操作機構防跳回路的分析[J].電氣傳動自動化,2005,27(5):57-59.