Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 文章瀏覽排名

基于IEC 61850標準的配置文件一致性測試方法研究

來源:電工電氣發布時間:2016-08-01 13:01 瀏覽次數:9
基于IEC 61850標準的配置文件一致性測試方法研究
 
宋子健1,胡春亮2,卜京1,吉曉筱1
(1 南京理工大學 自動化學院,江蘇 南京 210094;
2 鎮江中船系統集成股份有限公司,江蘇 鎮江 212009)
 
    摘 要:IEC 61850 配置文件一致性測試是保證智能電子設備正確通信完成互操作的重要手段。提出了一種基于模糊綜合評價模型的IEC 61850 配置文件一致性測試方法。結合IEC 61850 標準和一致性測試工程實際要求,從標準、技術和經濟三個層面提出了評判模板優劣的指標,在改進層次分析法計算各指標相對于目標的權重值基礎上,采用模糊綜合評價模型對待選模板進行模板優屬性的評估,并給出合理的模板采用建議。依據工程實際數據進行算例仿真,驗證了該方法的有效性。
    關鍵詞:一致性測試;IEC 61850;模板;改進層次分析法;模糊綜合評價模型
    中圖分類號:TM631 文獻標識碼:A 文章編號:1007-3175(2016)07-0052-07
 
Research on Configuration File Conformance Testing
Method Based on Standard IEC 61850
 
SONG Zi-jian1, HU Chun-liang2, BU Jing1, JI Xiao-xiao1
(1 School of Automation, Nanjing University of Science and Technology, Nanjing 210094, China;
2 Zhenjiang Mid Ship System Integration Co., Ltd, Zhenjiang 212009, China)
 
    Abstract: The conformance testing of configuration files based on IEC 61850 standards is an important method that can guarantee the correct communication between the intelligent electronic devices. This paper proposed a kind of IEC 61850 configuration file conformance testing method based on the fuzzy synthetic evaluation model. Combining with the standard IEC 61850 and the engineering practice requirements of conformance testing, this paper raised the evaluation index of the template which was about the standards, technology and economy. The weight value of each index was calculated by using the improved analytic hierarchy process. On this basis, the fuzzy synthetic evaluation model was used to evaluate the selection of the template and the reasonable suggestions were given. The validity of the method is demonstrated by numerical simulation of the actual data.
    Key words: conformance testing; IEC61850; template; improved analytic hierarchy process; fuzzy synthetic evaluation model
 
參考文獻
[1] 樊陳,倪益民,竇仁暉,等. 智能變電站信息模型的討論[J]. 電力系統自動化,2012,36(13):15-19.
[2] 王珍珍,孫丹.IEC 61850 配置文件測試的研究[J].電力系統保護與控制,2011,39(6):95-98.
[3] 張燕濤,黃倫,王慶平,等. IEC 61850標準一致性測試的方案和現場應用[J]. 電力系統自動化,2008,32(4):98-102.
[4] 高磊.IEC 61850 SCL 配置文件比對工具的研究與實現[J]. 電力系統自動化,2013,37(20):88-91.
[5] 楊紫苓,顧建煒,張鐵峰. 基于本體的IEC 61850 語義信息模型一致性校驗[J]. 信息技術,2014(5):71-74.
[6] 何磊. IEC 61850應用入門[M]. 北京:中國電力出版社,2012.
[7] 陳安偉,朱松林,樂全明,等.IEC 61850 在變電站中的工程應用[M]. 北京:中國電力出版社,2012.
[8] 林濟鏗,李童飛,趙子明,等. 基于熵權模糊綜合評價模型的電力系統黑啟動方案評估[J]. 電網技術,2012,36(2):115-120.
[9] 段若晨,王豐華,顧承昱,等. 采用改進層次分析法綜合評估500 kV輸電線路防雷改造效果[J]. 高電壓技術,2014,40(1):131-137.
[10] 叢偉,路慶東,田崇穩,等. 智能配電終端及其標準化建模[J]. 電力系統自動化,2013,37(10):6-12.
[11] 王鋼, 丁茂生, 李曉華, 肖霖. 數字繼電保護裝置可靠性研究[J]. 中國電機工程學報,2004,24(7):47-52.
[12] 黃立新. 變電站自動化系統中二次設備可靠性分析[J]. 能源與節能,2013(5):7-9.
[13] 吳姜,曹建東,張弛,等. 二次設備量化評估中故障概率的計算方法[J]. 電力系統及其自動化學報,2012,24(6):78-82.
[14] 居勇,黃其昱,丘慶全,等.220 kV智能變電站造價趨勢分析[J]. 智能電網,2014,2(1):67-72.
[15] 曾慶禹. 變電站的壽命周期成本與新技術發展分析[J]. 中國電力,2000,33(12):35-38.