一臺檢修變壓器無勵磁分接開關問題的分析與處理
陳朋1，韋良斌2，陳傳明2，宋文翠2
（1 山東電工電氣集團智能電氣有限公司，山東 濟南 250022；
2 山東電力設備有限公司，山東 濟南 250022）
摘 要：介紹了一臺110 kV 主變在工廠化檢修過程中無勵磁分接開關出現的問題，通過對該變壓器無勵磁分接開關電氣原理圖的理論分析，并結合國內變壓器和無勵磁分接開關制造技術的發展歷程，判定故障問題發生的根源在于實物與原理圖的不統一，進而得出了該案例的處理方案，該案例的分析與處理過程對電力變壓器的工廠化檢修具有參考意義。
關鍵詞：變壓器；工廠化檢修；無勵磁分接開關；分析
中圖分類號：TM403.4 文獻標識碼：B 文章編號：1007-3175(2016)11-0028-03
Analysis and Treatment of Off-Circuit Tap-Changer for a
Transformer in Maintenance
CHEN Peng1, WEI Liang-bin2, CHEN Chuan-ming2, SONG Wen-cui2
（1 Shandong Electrical Engineering & Equipment Group Intelligent Electric Co., Ltd, Jinan 250022, China;
2 Shandong Power Equipment Co., Ltd, Jinan 250022, China）
Abstract: Introduction was made to the problem of the off-circuit tap-changer for a 110 kV main transformer in the factory overhaul process.
By theoretically analyzing the electrical principle diagram of the transformer off-circuit tap-changer, combining with the development history of domestic transformer and off-circuit tap-changer manufacturing technology, this paper judged that the malfunction problem was caused by the disunity between the entity and the schematic diagram, so as to obtain the processing scheme of this case. The case analysis and treating processes provide references for factory overhaul of power transformer.
Key words: transformer; factory overhaul; off-circuit tap-changer; analysis
參考文獻
[1] 張德明，楊建琴.WSL 籠形無勵磁分接開關[J]. 變壓器，2005，42(6)：36-37.
[2] 張德明. 變壓器分接開關選型與使用[M]. 北京：中國電力出版社，2006.
[3] 陳樂.110 kV主變檢修技術及缺陷處理[J]. 電工電氣，2012(5)：50-52.
[4] 唐黎標. 變壓器常見故障檢測和解決方法[J]. 電工電氣，2014(5)：61-62.
[5] 楊宇峰，黨彤，郭小梅，等. 一臺干式配電變壓器線圈匝間短路事故分析[J]. 電工電氣，2016(5)：39-41.
