電子式電流互感器的技術研究進展
 

王鐵鋼，辛守喬
（國網吉林省電力有限公司檢修公司，吉林 長春 130022）
 

    摘 要：電子式電流互感器(ECT) 具有低功耗、高絕緣性和智能化等優點。介紹了各種ECT 工作原理和采用的技術，并指出各自的優點及存在的問題，展望了ECT 的發展趨勢，指出今后將是有源ECT、無源ECT 共同發展的局面，無源ECT 會在發電廠、變電站等重要電力場所推廣使用，而中低壓小電流的測量將是有源ECT 的發展空間。
    關鍵詞：電子式電流互感器；變電站；智能電網；工作原理；發展趨勢
    中圖分類號：TM452     文獻標識碼：A     文章編號：1007-3175(2017)02-0007-06
 

Technology Research Progress of Electronic Current Transformer

 

WANG Tie-gang, XIN Shou-qiao
（State Grid Jilisheng Electric Power Supply Company Maintenance Company, Changchun 130022, China）
 

    Abstract: The electronic current transformer (ECT) possesses low power consumption, high insulativity and intelligentization etc advantages. Introduction was made to various kinds of ECT working principle and the adopted technology. The concrete advantages and existing problems were pointed out. This paper expected the development tendency of ECT and presented the joint development situation of active and passive ECT in the future. The passive ECT would be generalized in power station and substation etc important power place, while the measurement of low median voltage and small current would be the development space of active ECT.
    Key words: electronic current transformer; power substation; smart grid; working principle; development tendency
 

參考文獻
[1] Emerging Technologies Working Group, Fiber Optic Sensors Working Group.Optical Current Transducers for Power Systems：A Review[J]. IEEE Transactions on Power Delivery，1994，9(4)：1778-1788.
[2] NING Y N, WANG Z P, PALMER A W, et al. Recent Progress in Optical Current Sensing Techniques[J]. Review of Scientific Instruments，1995，66(5)：3097-3111.
[3] HU Juan,ZHOU Youqing,ZHU Qing.New electronic current transducers for measurement and protection in power system[C]//International Conference on Electrical Machines and Systems，2001：317-321.
[4] MLEJNEK P, VOPALENSKY M, RIPKA P.AMR current measurement device[J].Sensors and Actuators A Physical，2008，141(2)：649–653.
[5] RAMIREZ D, PELEGRI J, NAVARRO A E, et al. Characterization of Giant Magnetoresistance Effect Based Sensors and Its Applications[C]//IEEE Instrumentation and Measurement Technology Conference，2000，2：571-574.
[6] VIETH M, CLEMENS W, BERG H V D, et al. Contactless current detection with GMR sensors based on an artificial antiferromagnet(AAF) subsystem[J]. Sensors and Actuators A Physical，2000，81(1-3)：44-48.
[7] PAPP A, HARMS H.Magnetooptical current transformer.1:Principles[J]. Applied Optics，1980，19(22)：3729-3734.
[8] BOHNERT K, GABUS P, NEHRING J, et al. Fiber-Optic Current Sensor for Electrowinning of Metals[J]. Journal of Lightwave Technology，2007，25(11)：3602-3609.
[9] NICATI P A, ROBERT P.Stabilised Current Sensor Using Sagnac Interferometer[J]. Journal of Physics E Scientific Instruments，1988，21(21)：791-796.
[10] BLAKE J, TANTASWADI P, DE CARVALHO R T.In-Line Sagnac Interferometer Current Sensor[J]. IEEE Transactions on Power Delivery，1996，11(1)：116-121.
[11] BOHNERT K, GABUS P, NEHRING J, et al. Temperature and vibration insensitive fiberoptic current sensor[J]. Journal of Lightwave Technology，2002，20(2)：267-276.
[12] BOHNERT K, BRANDLE H, BRUNZEL M G, et al. Highly Accurate Fiber-Optic DC Current Sensor for the Electrowinning Industry[J]. IEEE Transactions on Industry Applications，2007，43(1)：180-187.
[13] BOHNERT K, GABUS P, BRANDLE H, et al.Fiberoptic dc current sensor for the electro-winning industry[C]//17th International Conference on Optical Fibre Sensors，2005：210-213.
[14] BOHNERT K, GABUS P, BRANDLE H, et al.Fiber-Optic Current and Voltage Sensors for High-Voltage Substations[C]//16th International Conference on Optical Fiber Sensors，2003：752-754.
[15] BLAKE J N, ROSE A H.Fiber-optic current transducer optimized for power metering applications[C]//Transmission and Distribution Conference and Exposition，2003，1：405-408.
[16] RAHMAYIAN F, BLAKE J N.Applications of High-Voltage Fiber Optic Current Sensors[C]// Power Engineering Society General Meeting，2006：1-6.
[17] WILLSCH M, BOSSELMANN T.Optical current sensor application in the harsh environment of a 120 MVA power generator[C]//Optical Fiber Sensors Conference Technical Digest，2002，1：407-410.
[18] CEASE T W, JOHNSTON P.A magneto-optic current transducer[J]. IEEE Transactions on Power Delivery，1990，5(2)：548-555.
[19] SATO T, TAKAHASHI G, INUI Y, et al.Method and apparatus for optically measuring a current：USA, 4564754[P].1986.07.14.
[20] NING Y N, JACKSON D A.Review of optical current sensors using bulk-glass sensing elements[J]. Sensors and Actuators A Physical，1993，39(3)：219-224.
[21] YOSHIDA Y, KAWAZOE S, IBUKI K, et al.New fault locating system for air-insulating substations using optical current detector[J]. IEEE Transactions on Power Delivery，1992，7(4)：1805-1812.
[22] YI B, CHU B C B, CHIANG K S.New Design of Optical Current Sensor for Sensitivity Improvement[C]//IEEE Instrumentation & Measurement Technology Conference，1999，2： 1149-1153.
[23] YI B, CHU B C B, CHIANG K S.Magneto-optical electric-current sensor with enhanced sensitivity[J]. Measurement Science and Technology，2002，13(7)：61-63.
[24] IMAMURA M, TOKUBUCHI M. Magnetic Field Analysis for the Optical Current-Transformer Used for Three-Phase Bus-Bars Arranged Longitudinally[J]. IEEE Transactions on Magnetics，1996，32(5)：4962-4964.
[25] IMAMURA M, NAKAHARA M, YAMAGUCHI T, et al. Analysis of Magnetic Fields Due to Three-Phase Bus Bar Currents for the Design of an Optical Current Transformer[J] .IEEE Transactions on Magnetics，1998，34(4)：2274-2279.
[26] PETRICEVIC S J, STOJKOVIC Z, RADUNOVIC J B. Practical Application of Fiber-Optic Current Sensor in Power System Harmonic Measurement[J]. IEEE Transactions on Instrumentation and Measurement，2006，55(3)：923-930.
[27] KOJOVIC L.PCB rogowski coils benefit relay protection[J]. IEEE Computer Applications in Power，2002，15(3)：50-53.
[28] KOJOVIC L. PCB Rogowski Coil Designs and Performances for Novel Protective Relaying[C]//Power Engineering Society General Meeting，2003，2：609-614.
[29] PORTO D, BERMUDEZ J L, RACHIDI F, et al.Design of a new air-cored current transformer：analytical modeling and experimental validation[C]//Industry Applications Conference，2004，1(1)：532-537.
[30] DALESSANDRO L, ODENDAAL W G H, KOLAR J W.HF Characterization and Nonlinear Modeling of a Gapped Toroidal Magnetic Structure[J]. IEEE Transactions on Power Electronics，2006，21(5)：1167-1175.
[31] DALESSANDRO L, KARRER N,KOLAR J W.High-Performance Planar Isolated Current Sensor for Power Electronics Applications[J]. IEEE Transactions on Power Electronics，2007，22(5)：1682-1692.
[32] BAZZOCCHI R, DI RIENZO L. Interference rejection algorithm for current measurement using magnetic sensor arrays[J].Sensors and Actuators A Physical，2000，85(1-3)：38-41.
[33] DI RIENZO L, BAZZOCCHI R, MANARA A.Circular Arrays of Magnetic Sensors for Current Measurement[J]. IEEE Transactions on Instrumentation and Measurement，2001，50(5)：1093-1096.
[34] ZHANG Z, DI RIENZO L.Optimization of Magnetic Sensor Arrays for Current Measurement Based on Swarm Intelligence and D-Optimality[J]. COMPEL，2009，28(5)：1179-1190.
[35] MANARA A, DI RIENZO L, OTTOBONI R.Low-cost current transducer based on circular array of magnetic sensors[C]//11th IMEKO TC-4 Symp. Trends in Electrical Measurement and Instrumentation，2001：135-139.
[36] D＇ANTONA G, DI RIENZO L, OTTOBONI R, et al. Processing Magnetic Sensor Array Data for AC Current Measurement in Multiconductor Systems[J]. IEEE Transactions on Instrumentation and Measurement，2001，50(5)：1289-1295.
[37] D＇ANTONA G, DI RIENZO L, OTTOBONI R,et al. Metrological Validation of a Novel Three-Phase Current Sensor[C]//IEEE Instrumentation and Measurement Technology Conference，2001：106-110.
[38] 張自馳，張國鋼，耿英三，等. 磁傳感器陣列測量大電流的傳感器拓?fù)鋯栴}研究[J]. 電力系統自動化，2007，31(23)：74-78.