Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 往年索引

配電終端配置方式對配電自動化的影響

來源:電工電氣發布時間:2017-05-24 10:24 瀏覽次數:6
配電終端配置方式對配電自動化的影響
 
唐銳,吳宗兵,汪雯珺
(國網安徽省電力公司滁州供電公司,安徽 滁州 239000)
 
    摘 要:介紹了配電自動化的概念、功能及配電終端在配電自動化中起到的作用,闡述了架空線和電纜配電終端安裝位置的區別。分析了配電終端配置方式對供電可靠性和經濟性的影響,得出在設計配電終端模塊配置方式時,除了考慮供電可靠性和經濟性外,還需要結合饋線的整體結構,并根據饋線故障率、人工故障隔離時間、故障恢復時間和供電可用率要求進行規劃,為配電自動化規劃設計提供了參考。
    關鍵詞:配電終端;配置方式;配電自動化;可靠性;經濟性
    中圖分類號:TM642     文獻標識碼:B     文章編號:1007-3175(2017)05-0061-05
 
Influence of Terminal Configuration Mode on Distribution Automation
 
TANG Rui, WU Zong-bing, WANG Wen-jun
(State Grid Chuzhou Power Supply Company, Chuzhou 239000, China)
 
    Abstract: Introduction was made to the concept and function of distribution automation and the role played by power distribution terminal in distribution automation systems. This paper explained the difference of installation location of overhead lines and cable distribution terminals and analyzed the influence of terminal configuration mode on power supply reliability and economy. In addition, it was concluded that the overall structure of the feeder, feeder fault rate, artificial fault isolation time, fault recovery time and power supply availability rate should also be considered when designing terminal configuration mode had been obtained, which provides a theoretical reference basis for distribution automation planning.
    Key words: distribution terminal; configuration mode; distribution automation; reliability; economy
 
參考文獻
[1] 李杰,石憲. 配電自動化發展中應該著重解決的若干問題[J]. 供用電,2015,32(12):58-60.
[2] 徐丙垠,李天友. 配電自動化若干問題的探討[J].電力系統自動化,2010,34(9):81-85.
[3] 徐丙垠,李天友,薛永端. 智能配電網與配電自動化[J]. 電力系統自動化,2009,33(17):38-41.
[4] 劉健,趙樹仁,張小慶. 中國配電自動化的進展及若干建議[J]. 電力系統自動化,2012,36(19):6-10.
[5] 沈兵兵,吳琳,王鵬. 配電自動化試點工程技術特點及應用成效分析[J]. 電力系統自動化,2012,36(18):27-31.
[6] 鄭毅,劉天琪,洪行旅,等. 中心城市大型配電自動化設計方案與應用[J]. 電力系統自動化,2012,36(18):49-53.
[7] 劉健,林濤,趙江河,等. 面向供電可靠性的配電自動化系統規劃研究[J]. 電力系統保護與控制,2014,42(11):52-60.
[8] 葛亮,譚志海,趙鳳青,等. 一種改進型饋線自愈控制方案及實現[J]. 電力系統保護與控制,2013,41(18):61-67.